Model PL - 760 PL -910 PL -1060
Capacity
Center Height 28” - 710 mm 34” - 860 mm 40” - 1010 mm
Swing over bed 54” - 1370 mm 66” - 1675 mm 78” - 1980 mm
Swing over cross slide 42” - 1050 mm 54” - 1350 mm 64” - 1625 mm
Swing in gap 76” - 1930 mm 88” - 2235 mm 100” - 2540 mm
Bed
Bed Type 2V & 2Flat (Plano Type) 2V & 2Flat (Plano Type) 2V & 3Flat (Plano Type)
Bed Width 30” - 760 mm 36” - 910 mm 42” - 1060 mm
Length of gape in Front of face plate 12” - 300 mm 12” - 300 mm 12” - 300 mm
Total length of bed Admit between center Admit between center Admit between center
14’ feet / 14’ feet /15’ feet 2000 mm 2000 mm 2000 mm
18’ feet / 18’ feet / 18’ feet 3000 mm 3000 mm 3000 mm
21’ feet / 21’ feet / 21’ feet 4000 mm 4000 mm 4000 mm
24’ feet / 24’ feet / 25’ feet 5000 mm 5000 mm 5000 mm
27’ feet / 27’ feet / 28’ feet 6000 mm 6000 mm 6000 mm
31’ feet / 31’ feet / 31’ feet 7000 mm 7000 mm 7000 mm
Head Stock
Number of spindle speed 6 6 6
Range of spindle speed 10 - 150 RPM 10 - 150 RPM 10 - 150 RPM
Spindle nose dia. 6.1/4” - 160 mm 6.1/4” - 160 mm 6.1/4” - 160 mm
Spindle bore 4” - 100 mm 4.3/4” - 120 mm 4.3/4” - 120 mm
Spindle threads 6 TPI 6 TPI 6 TPI
Taper in spindle sleeve MT - 6 MT - 6 MT - 6
Carriage & Compound
Cross slide dimension 16”-400 x 28”-710mm 16”-400 x 30”-760 mm 18”-455 x 36”-910 mm
Cross slide travel 28”-710 mm 34”-860 mm 40”-1010 mm
Compound slide dimension 21”-530 x 9”-225 mm 21”-530 x 9"-225 mm 24”-610 x 10” -250 mm
Compound slide travel 12”-300 mm 12”-300 mm 12”-300 mm
Tool post square 9”-228 mm 9”-228 mm 10”-250 mm
Tool shank section 1.1/2”-38mm x 1.1/2”-38mm 1.1/2”-38mm x 1.1/2”-38mm 1.1/2”-38mm x 1.1/2”-38mm
Tail stock
Spindle ram diameter 5” - 125 mm 5” - 125 mm 6” - 150 mm
Spindle ram travel 20” - 500 mm 20” - 500 mm 20” - 500 mm
Taper in tail stock quill MT - 6 MT - 6 MT - 6
Threads
No. of threads range in metric 24 24 24
No. of threads range in inch 43 43 43
No. of pitch range in metric 0.5 to 15 PITCH 0.5 to 15 PITCH 0.5 to 15 PITCH
No. of pitch range in inch 2 to 60 TPI 2 to 60 TPI 2 to 60 TPI
Lead screw diameter 2” - 50 mm 2” - 50 mm 2” - 50 mm
Lead screw threads 2 TPI 2 TPI 2 TPI
Electricals
Motor Recommanded 10 H.P. 15 H.P. 20 H.P.
 
Induction harden bed ways.
Bed Is Made From High Quality Cast Iron and Strictly Inspected With Micro Level & Straight Edge.
Single Piece Plano Type Solid Bed.
Turcite - B Coated In Saddle & Cross Slide Guideways.
Heavy Duty Headstock, In Which Spindle Runs On One Taper Roller Bearing and One Cylindrical Roller Bearing In Front & One Taper Roller Bearing At Rear Side.
Headstock Spindle Is Made From High Tensile Steel Duly Hardened & Ground.
Double Shaft Norton Gear Box & Apron, Which Is Totally Enclosed Oil Bath System With Lever Type Arrangement for Automatic Feeds.
Sliding Type Counter Assembly For Easy Changing Of V-belt From One Step To Another Step.
Tail Stock Spindle Is Hardened & Ground, Made From Alloy Steel.
Meticulous Care is Taken in Selecting The Right Raw Material For Every Component. Each & Every Component Is Passed Through Strict Quality Control.
Machine Accuracy Is Tested As Per Is : 1878 (part - I) 1971.

 
Chuck Back Plate, Tool Post Spanner, Motor Pulley, Motor Channel, Change Gear Set, Fix Spanner Set, Allen Key Set & Oil Cane.
 
Optional Accessories :
Face Plate, Steady Rest, Follow Rest, Carrier Plate, Rear Tool Post With Extended Cross Slide, Coolant Pump with Tank And Fittings, Taper Turning Attachment, Machine Lamp, Electric Motor, R/F Switch, Motor V- Belt, Dog Chuck, True Chuck, Customized Center Height of Machine.

 

OUR PRODUCT