Capacity :
 
Standard Center height 13”-330 mm
Optional Center height 15”-380 mm
Center height
13” -330 mm
15” -380 mm
Swing over bed
25” -635 mm
29” -735 mm
Swing over Cross slide
17” -430 mm
21” -530 mm
Swing in gape
37” -94 0mm
41” -1040 mm
 
Bed :
Bed Lengh
Admit Between Center
EHD-1 (5’-6” - 1675 mm)
22” - 555 mm
EHD-2 (7’-0” - 2135 mm)
39” -1000 mm
EHD-3 (9’-0” - 2745 mm)
64” -1625 mm
EHD-4 (10’-0” - 3050 mm)
76” -1930 mm
EHD-5 (12’-0” - 3660 mm)
100” -2540 mm
EHD-6 (14’-0” - 4270 mm)
124” -3150 mm
EHD-7 (16’-0” - 4875 mm)
147” -3700 mm
EHD-8 (18’-0” - 5485 mm)
170” -4300 mm
EHD-9 (20’-0” - 6100 mm)
195” -4900 mm
Bed type
2V & 2 Flat
Bed width
15” -380 mm
Lenght of gape in front of face plate
8”- 200 mm
 
Head Stock :
Number of spindle speed
8
Range of spindle speed
30 to 490 RPM
Spindle nose dia.
3” -76 mm
Spindle bore
2.1/8” -52 mm
Spindle threads
6 TPI
Spindle morse taper (Inside)
Mt - 4
 
Carriage & Compound :
Cross Slide Dimension
10 -250 mm x 20” -510 mm
Cross slide travel
13” -330 mm
Compound slide dimension
14” -355 mm x 6” -155 mm
Compound slide travel
8” -200 mm
Tool post square
6” -150 mm
Tool shank section
1” -25mm x 1” -25 mm
 
Tail Stock :
Spindle ram diameter
2.3/4” -70 mm
Spindle ram travel
8”-200 mm
Spindle ram morse taper
MT -4
 
Threads :
Number of threads range in metric
13
Number of threads range in inch
19
Number of pitch range in metric
1 to 6 PITCH
Number of pitch range in inch
2 to 24 TPI
Lead screw diameter
1.1/2” -38 mm
Lead screw threads
4 TPI
 
Induction harden bed ways.
Bed is made from high quality cast iron & strictly inspected with microlevel & straight edge.
Headstock spindle is made from high tensile steel duly hardened & ground.
Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
Tail stock spindle is hardened & ground, made from alloy steel.
Meticulous care is taken in selecting the right raw material for every component.
Each & every component is passed through strict quality control.
Machine accuracy is tested as per IS : 1878 (Part - I) 1971.
 
Standard Accessories :
Chuck back plate, tool post spanner, Centre adapter, Dead centres - 2 nos, Motor Pulley, Change gear set.
 
Optional Accessories :
Face plate, Steady rest, Follow rest, Carrier plate, Full or Semi Norton gear box, Rear tool post with extended cross slide, Coolant pump with tank & fittings, Taper turning attachment, Machine lamp, Electric Motor, R/f Switch, Motor Vee Belt, Dog chuck, True chuck, Spindle bore (3.1/8” - 80mm, 4.1/8” -100mm, 5.1/8” -130mm, 6.1/8” -155mm)
 
Electrical :
Motor Recommended 5 H.P. / 3.7 KW
 
 
General Specification
Model Machine Weight (Approx) Kgs. Floor Space (Approx) L x W x H (mm)
EHD-1 1450 kgs. 2000 x 1150 x 1650
EHD-2 1650 kgs. 2450 x 1150 x 1650
EHD-3 1750 kgs. 3000 x 1150 x 1650
EHD-4 1950 kgs. 3450 x 1150 x 1650
EHD-5 2150 kgs. 4100 x 1150 x 1650
EHD-6 2550 kgs. 4750 x 1150 x 1650
EHD-7 2950 kgs. 5350 x 1150 x 1650
EHD-8 3450 kgs. 6100 x 1150 x 1650
EHD-9 3950 kgs. 6400 x 1150 x 1650

 

OUR PRODUCT