Model
PL - 510
PL - 610
Capacity
Center Height
18” - 455 mm
22” - 560 mm
Swing over bed
35” - 890 mm
43” - 1090 mm
Swing over cross slide
24” - 610 mm
30” - 760 mm
Swing in gap
50” - 1270 mm

58” - 1470 mm
Bed
Bed Type
2V & 2Flat (Plano Type)
2V & 2Flat (Plano Type)
Bed Width
20” - 508 mm
24” - 610 mm
Length of gape in Front of face plate
10” - 250 mm
10” - 250 mm
Total length of bed
Admit between center
Admit between center
12’ feet / 14’ feet
2000 mm
2000 mm
16’ feet / 17’ feet
3000 mm
3000 mm
19’ feet / 20’ feet
4000 mm
4000 mm
22’ feet / 24’ feet
5000 mm
5000 mm
26’ feet / 27’ feet
6000 mm
6000 mm
29’ feet / 30’ feet
7000 mm
7000 mm
Head Stock
Number of spindle speed
6
6
Range of spindle speed
20 - 200 RPM
10 - 150 RPM
Spindle nose dia.
5” - 130 mm
6.1/4” - 160 mm
Spindle bore
4” - 100 mm
4.3/4” - 120 mm
Spindle threads
6 TPI
6 TPI
Taper in spindle sleeve
MT - 5
MT - 6
Carriage & compound
Cross slide dimension
12” - 300mm x 22” - 560mm
12” - 300mm x 24” - 610mm
Cross slide travel
18” - 455 mm
22” - 560 mm
Compound slide dimension
17” - 430 mm x 7” - 175 mm
17” - 430 mm x 7” - 175 mm
Compound slide travel
10” - 250 mm
10” - 250 mm
Tool post square
7” - 175 mm
7” - 175 mm
Tool shank section
1.1/4”-32mm x 1.1/4”-32mm
1.1/4”-32mm x 1.1/4”-32 mm
Tail stock
Spindle ram diameter
3.1/2” - 90 mm
5” - 125 mm
Spindle ram travel
10” - 250 mm
18” - 450 mm
Taper in tail stock quill
MT - 5
MT - 6
Threads
No. of threads range in metric
24
24
No. of threads range in inch
43
43
No. of pitch range in metric
0.5 to 15 PITCH
0.5 to 15 PITCH
No. of pitch range in inch
2 to 60 TPI
2 to 60 TPI
Lead screw diameter
1.3/4” - 45 mm
2” - 50 mm
Lead screw threads
2 TPI
2 TPI
Electricals
Motor Recommanded
5 H.P. / 1000 RPM
7.5 H.P. / 1000 RPM
 
 
Induction harden bed ways.
Bed Is Made From High Quality Cast Iron and
Strictly Inspected With Micro Level & Straight Edge.
Single Piece Plano Type Solid Bed.
Turcite - B Coated In Saddle & Cross Slide Guideways.
Heavy Duty Headstock, In Which Spindle Runs On One Taper Roller Bearing and One Cylindrical Roller Bearing In Front & One Taper Roller Bearing At Rear Side.
Headstock Spindle Is Made From High Tensile Steel Duly Hardened & Ground.
Double Shaft Norton Gear Box & Apron, Which Is Totally Enclosed Oil Bath System With Lever Type Arrangement for Automatic Feeds.
Sliding Type Counter Assembly For Easy Changing Of V-belt From One Step To Another Step.
Tail Stock Spindle Is Hardened & Ground, Made From Alloy Steel.
Meticulous Care is Taken in Selecting The Right Raw Material For Every Component. Each & Every Component Is Passed Through Strict Quality Control.
Machine Accuracy Is Tested As Per Is : 1878 (part - I) 1971.
 
Chuck Back Plate, Tool Post Spanner, Motor Pulley, Motor Channel, Change Gear Set, Fix Spanner Set, Allen Key Set & Oil Cane.Chuck Back Plate, Tool Post Spanner, Motor Pulley, Motor Channel, Change Gear Set, Fix Spanner Set, Allen Key Set & Oil Cane.

 
 
Optional Accessories :
Face Plate, Steady Rest, Follow Rest, Carrier Plate, Rear Tool Post With Extended Cross Slide, Coolant Pump with Tank And Fittings, Taper Turning Attachment, Machine Lamp, Electric Motor, R/F Switch, Motor V- Belt, Dog Chuck, True Chuck, Customized Center Height of Machine.
 
General Specification
 
MODEL
 Machine Weight (Approx) Kgs. Floor Space (Approx) L x W x H
PL-510 / 2000
 4000 Kgs. 4000 x 1675 x 1550 mm
PL-510 / 3000
 4700 Kgs. 5200 x 1675 x 1550 mm
PL-510 / 4000
 5400 Kgs. 6100 x 1675 x 1550 mm
PL-510 / 5000
 6000 Kgs. 7000 x 1675 x 1550 mm
PL-510 / 6000
 6700 Kgs. 8200 x 1675 x 1550 mm
PL-510 / 7000
 7500 Kgs. 9200 x 1675 x 1550 mm
   
MODEL
 Machine Weight (Approx) Kgs. Floor Space (Approx) L x W x H
PL-610 / 2000
 6100 Kgs. 4600 x 1800 x 1600 mm
PL-610 / 3000
 6700 Kgs. 5500 x 1800 x 1600 mm
PL-610 / 4000
 7400 Kgs. 6400 x 1800 x 1600 mm
PL-610 / 5000
 8100 Kgs. 7600 x 1800 x 1600 mm
PL-610 / 6000
 8700 Kgs. 8600 x 1800 x 1600 mm
PL-610 / 7000
 9300 Kgs. 9500 x 1800 x 1600 mm

OUR PRODUCT