premier logo premier-lathe-manufacturing company since-1971
world map
button right
     
 
Products
arrow PL 760/910/1060
 
 
Model PL - 760 PL -910 PL -1060
Capacity
Center Height 28” - 710 mm 34” - 860 mm 40” - 1010 mm
Swing over bed 54” - 1370 mm 66” - 1675 mm 78” - 1980 mm
Swing over cross slide 42” - 1050 mm 54” - 1350 mm 64” - 1625 mm
Swing in gap 76” - 1930 mm 88” - 2235 mm 100” - 2540 mm
Bed
Bed Type
2V & 2Flat (Plano Type) 2V & 2Flat (Plano Type) 2V & 3Flat (Plano Type)
Bed Width
30” - 760 mm 36” - 910 mm 42” - 1060 mm
Length of gape in Front of
face plate
12” - 300 mm 12” - 300 mm 12” - 300 mm
Total length of bed
Admit between center Admit between center Admit between center
14’ feet / 14’ feet /15’ feet
2000 mm 2000 mm 2000 mm
18’ feet / 18’ feet / 18’ feet
3000 mm 3000 mm 3000 mm
21’ feet / 21’ feet / 21’ feet
4000 mm 4000 mm 4000 mm
24’ feet / 24’ feet / 25’ feet
5000 mm 5000 mm 5000 mm
27’ feet / 27’ feet / 28’ feet
6000 mm 6000 mm 6000 mm
31’ feet / 31’ feet / 31’ feet 7000 mm 7000 mm 7000 mm
Head Stock
Number of spindle speed
6 6 6
Range of spindle speed
10 - 150 RPM 10 - 150 RPM 10 - 150 RPM
Spindle nose dia.
6.1/4” - 160 mm 6.1/4” - 160 mm 6.1/4” - 160 mm
Spindle bore
4” - 100 mm 4.3/4” - 120 mm 4.3/4” - 120 mm
Spindle threads
6 TPI 6 TPI 6 TPI
Taper in spindle sleeve MT - 6 MT - 6 MT - 6
Carriage & Compound
Cross slide dimension
16” - 400 x 28” - 710 mm
16” - 400 x 30” - 760 mm
18” - 455 x 36” - 910 mm
Cross slide travel
28” - 710 mm 34” - 860 mm 40” - 1010 mm
Compound slide dimension
21” - 530 x 9” -225 mm 21” - 530 x 9” -225 mm 24” - 610 x 10” - 250 mm
Compound slide travel
12” - 300 mm 12” - 300 mm 12” - 300 mm
Tool post square
9” - 228 mm 9” - 228 mm 10” - 250 mm
Tool shank section 1.1/2” - 38 mm x 1.1/2” - 38 mm 1.1/2” - 38 mm x 1.1/2” - 38 mm 1.1/2” - 38 mm x 1.1/2” - 38 mm
Tail stock
Spindle ram diameter 5” - 125 mm
5” - 125 mm 6” - 150 mm
Spindle ram travel
20” - 500 mm 20” - 500 mm 20” - 500 mm
Taper in tail stock quill MT - 6 MT - 6 MT - 6
Threads
Number of threads range in metric 24
24
24
Number of threads range in inch
43 43 43
Number of pitch range in metric
0.5 to 15 PITCH 0.5 to 15 PITCH 0.5 to 15 PITCH
Number of pitch range in inch
2 to 60 TPI 2 to 60 TPI 2 to 60 TPI
Lead screw diameter
2” - 50 mm 2” - 50 mm 2” - 50 mm
Lead screw threads 2 TPI 2 TPI 2 TPI
Electricals
Motor Recommanded 10 H.P. 15 H.P. 20 H.P.
 
arrow Special Features
arrow Flame hardened bed ways.
arrow Bed Is Made From High Quality Cast Iron and
Strictly Inspected With Micro Level & Straight Edge.
arrow Single Piece Plano Type Solid Bed.
arrow Turcite - B Coated In Saddle & Cross Slide Guideways.
arrow
Heavy Duty Headstock, In Which Spindle Runs On One Taper Roller Bearing and One Cylindrical Roller Bearing In Front & One Taper Roller Bearing At Rear Side.
arrow Headstock Spindle Is Made From High Tensile Steel Duly Hardened & Ground.
arrow Double Shaft Norton Gear Box & Apron, Which Is Totally Enclosed Oil Bath System With Lever Type Arrangement for Automatic Feeds.
arrow Sliding Type Counter Assembly For Easy Changing Of V-belt From One Step To Another Step.
  Tail Stock Spindle Is Hardened & Ground, Made From Alloy Steel.
 
Meticulous Care is Taken in Selecting The Right Raw Material For Every Component. Each & Every
Component Is Passed Through Strict Quality Control.
  Machine Accuracy Is Tested As Per Is : 1878 (part - I) 1971.
 
arrow Standard Accessories
 
Chuck Back Plate, Tool Post Spanner, Motor Pulley, Motor Channel, Change Gear Set, Fix Spanner Set, Allen Key Set & Oil Cane.
   
arrow Optional Accessories
 
Face Plate, Steady Rest, Follow Rest, Carrier Plate, Rear Tool Post With Extended Cross Slide, Coolant Pump with Tank And Fittings, Taper Turning Attachment, Machine Lamp, Electric Motor, R/F Switch, Motor V- Belt, Dog Chuck, True Chuck, Customized Center Height of Machine.
 
Note
The Above Specification are approximate & subject to change without prior notice as improvements are made from time to time.
All the parts shown in photo are not included in standard accessories.
 
 
product-gallery
 
heavy-duty extra-heavy-duty
Light Duty Lathe Machines Medium Duty Lathe Machines Heavy Duty Lathe Machines Extra Heavy Duty Lathe Machines
       
hi cut PL 510/610
HI-CUT Lathe PL 510/610 PL 760/910/1060 Drill Machine
       
PL 510/610    
All Geared Precision Lathe -MDGH All Geared Precision Lathe -LDGH    
 
Home          About Us         Products         e-Catalogue         Photo gallery         Inquiry         Quality         Contacts