premier logo premier-lathe-manufacturing company since-1971
world map
button right
     
 
Products
arrow Extra Heavy Duty Lathe Machine
extra-heavy-duty-lathe machine
arrow Capacity
  Standard
Center height 13” -330 mm
Optional
Center height 15” -380 mm
Center height 13” -330 mm 15” -380 mm
Swing over bed 25” -635 mm 29” -735 mm
Swing over Cross slide 17” -430 mm 21” -530 mm
Swing in gape 37” -94 0mm 41” -1040 mm
 
arrow Bed
Bed Lengh Admit Between Center
EHD-1 (5’-6” - 1675 mm) 22” - 555 mm
EHD-2 (7’-0” - 2135 mm) 39” -1000 mm
EHD-3 (9’-0” - 2745 mm) 64” -1625 mm
EHD-4 (10’-0” - 3050 mm) 76” -1930 mm
EHD-5 (12’-0” - 3660 mm) 100” -2540 mm
EHD-6 (14’-0” - 4270 mm) 124” -3150 mm
EHD-7 (16’-0” - 4875 mm) 147” -3700 mm
EHD-8 (18’-0” - 5485 mm) 170” -4300 mm
EHD-9 (20’-0” - 6100 mm) 195” -4900 mm
Bed type 2V & 2 Flat
Bed width 15” -380 mm
Lenght of gape in front of face plate 8”- 200 mm
 
arrow Head Stock
Number of spindle speed 8
Range of spindle speed 30 to 490 RPM
Spindle nose dia. 3” -76 mm
Spindle bore 2.1/8” -52 mm
Spindle threads 6 TPI
Spindle morse taper (Inside) Mt - 4
 
arrow Carriage & Compound
Cross Slide Dimension 10 -250 mm x 20” -510 mm
Cross slide travel 13” -330 mm
Compound slide dimension 14” -355 mm x 6” -155 mm
Compound slide travel 8” -200 mm
Tool post square 6” -150 mm
Tool shank section 1” -25mm x 1” -25 mm
 
arrow Tail Stock
Spindle ram diameter 2.3/4” -70 mm
Spindle ram travel 8”-200 mm
Spindle ram morse taper MT -4
 
arrow Threads
Number of threads range in metric 13
Number of threads range in inch 19
Number of pitch range in metric 1 to 6 PITCH
Number of pitch range in inch 2 to 24 TPI
Lead screw diameter 1.1/2” -38 mm
Lead screw threads 4 TPI
 
arrow Special Features
arrow Flame hardened bed ways.
arrow Bed is made from high quality cast iron & strictly inspected with microlevel & straight edge.
arrow Headstock spindle is made from high tensile steel duly hardened & ground.
arrow Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
arrow Tail stock spindle is hardened & ground, made from alloy steel.
arrow Meticulous care is taken in selecting the right raw material for every component.
arrow Each & every component is passed through strict quality control.
arrow Machine accuracy is tested as per IS : 1878 (Part - I) 1971.
arrow Standard Accessories
Chuck back plate, tool post spanner, Centre adapter, Dead centres - 2 nos, Motor Pulley, Change gear set.
arrow Optional Accessories
Face plate, Steady rest, Follow rest, Carrier plate, Full or Semi Norton gear box, Rear tool post with extended cross slide, Coolant pump with tank & fittings, Taper turning attachment, Machine lamp, Electric Motor, R/f Switch, Motor Vee Belt, Dog chuck, True chuck, Spindle bore (3.1/8” - 80mm, 4.1/8” -100mm, 5.1/8” -130mm, 6.1/8” -155mm)
arrow Electrical
Motor Recommended 5 H.P. / 3.7 KW
arrow Colour Option
Green / Grey / Blue (Double Tone Colour at Extra Cost)
arrow General Specification
Model Machine Weight (Approx) Kgs. Floor Space (Approx) L x W x H (mm)
EHD-1 1450 kgs. 2000 x 1150 x 1650
EHD-2 1650 kgs. 2450 x 1150 x 1650
EHD-3 1750 kgs. 3000 x 1150 x 1650
EHD-4 1950 kgs. 3450 x 1150 x 1650
EHD-5 2150 kgs. 4100 x 1150 x 1650
EHD-6 2550 kgs. 4750 x 1150 x 1650
EHD-7 2950 kgs. 5350 x 1150 x 1650
EHD-8 3450 kgs. 6100 x 1150 x 1650
EHD-9 3950 kgs. 6400 x 1150 x 1650
 
Note
The Above Specification are approximate & subject to change without prior notice as improvements are made from time to time.
All the parts shown in photo are not included in standard accessories.
 
 
product-gallery
 
heavy-duty extra-heavy-duty
Light Duty Lathe Machines Medium Duty Lathe Machines Heavy Duty Lathe Machines Extra Heavy Duty Lathe Machines
       
hi cut PL 510/610
HI-CUT Lathe PL 510/610 PL 760/910/1060 Drill Machine
       
PL 510/610    
All Geared Precision Lathe -MDGH All Geared Precision Lathe -LDGH    
 
Home          About Us         Products         e-Catalogue         Photo gallery         Inquiry         Quality         Contacts